HAUMANN TECHNOLOGY · OEM MANUFACTURING

First Trial Pass on a Precision Lighting Endcap

Some parts pass at the first trial. This one did — every dimension, on the first samples.

The part is an injection molded endcap for an LED lighting fixture, about 40 × 25 × 11 mm, made in flame-retardant PC ABS. The drawing tolerance is ±0.015 in, about ±0.38 mm. At the T0 trial, all 11 drawing dimensions were measured on the first samples, and every dimension passed. The appearance checks passed as well.

Discuss Your Precision Part →
Precision lighting endcap – first trial pass injection molded PC/ABS component

Illustrative AI-generated visualization of a precision lighting endcap.

PROJECT OVERVIEW

At a Glance

A precision lighting component evaluated against its approved drawing requirements at the first T0 trial.

ChallengeSolutionResult
Hold ±0.015 in across all 11 drawing dimensions on a small precision endcap, and pass appearance checks on a visible lighting part. A mold and process built to the drawing, in flame-retardant PC ABS, proven at the T0 trial. All 11 dimensions measured on the first samples — every one passed. Appearance checks passed as well.
PROJECT SPECIFICATIONS

The Part at a Glance

Precision measured at the first trial.

This project focused on an injection molded LED lighting endcap with defined drawing tolerances, dimensional inspection and appearance validation.

PartInjection molded endcap for an LED lighting fixture
SizeAbout 40 × 25 × 11 mm
MaterialPC ABS, flame retardant grade
Drawing tolerance±0.015 in (about ±0.38 mm)
Dimensions measured at T011
Dimensions passed at T011 of 11
Appearance checks at T0Passed
TrialT0, first samples
01 · THE CHALLENGE

The Challenge

Precision is easy to promise and hard to prove. A part this size — about 40 by 25 by 11 mm — leaves little room for error, and the drawing leaves little either: ±0.015 in, about ±0.38 mm, across 11 dimensions.

For a lighting fixture, the endcap is also a visible part. That is why the trial checked appearance as well as dimensions. A part can measure right and still fail if it does not look right. Both had to pass.

Dimensional accuracy and appearance both had to pass at the first trial.
02 · ENGINEERING SOLUTION

The Solution

The mold and the process were built to the drawing. The material is PC ABS, flame retardant grade — chosen for the part and the application.

There is no shortcut to a first trial pass. It comes from the work done before the trial: the drawing understood, the tool designed for the material, and the process set up to hold the tolerance it demands.

The trial itself only proves what was already built into the part.

The drawing, material, mold and process all have to work together.
03 · VERIFIED PROJECT RESULT

The Result

At the T0 trial, all 11 drawing dimensions were measured on the first samples. Every dimension passed. The appearance checks passed as well.

11 of 11

Drawing Dimensions Passed

All 11 drawing dimensions were measured on the first samples, and every dimension passed at the T0 trial.

Passed

Appearance Checks

The appearance checks passed as well as the dimensional checks on the first samples.

Eleven out of eleven, first time.

That is what a first trial pass looks like when it is measured rather than claimed.

WHY FIRST-TRIAL VALIDATION MATTERS

What a First Trial Pass Is Worth

A failed first trial costs more than time. It costs a second trial, a tool change, and a program that slips while both are arranged. A first trial pass avoids all of that — the program moves forward on the evidence of the first samples.

That is why we measure every dimension at trial and record the result. A buyer choosing a supplier for a precision part is not buying a promise. They are buying evidence that the supplier can hold the drawing.

Eleven dimensions, all passed, on the first samples, is that evidence.

Evidence matters more than promises.

First-trial validation provides measurable evidence that the part meets its approved drawing requirements. Dimensional checks and appearance checks both matter when evaluating a precision component.

COMMON QUESTIONS

Frequently Asked Questions

More information about the precision lighting endcap, material, dimensional requirements and first trial validation.

An injection molded endcap for an LED lighting fixture, about 40 by 25 by 11 mm.

PC ABS, flame retardant grade.

The drawing tolerance is ±0.015 in, about ±0.38 mm.

All 11 drawing dimensions were measured on the first samples, and every dimension passed. The appearance checks passed as well.

11 drawing dimensions, all measured on the first samples. All 11 passed.

Yes. The appearance checks passed as well as the dimensional checks.

LET'S DISCUSS YOUR PROJECT

Need a Precision Part Held to the Drawing?

If you have a precision part and need a supplier who can prove it at trial, talk to our engineering team. Send the drawing and we will tell you honestly what it will take to hold it — and how we will measure it.

Contact Us to Start Your Project →